The Decentlab DL-ZN Dendrometer is a LoRaWAN dendrometer designed to measure the swelling and shrinkage of plant stems, branches, or roots. Once installed, the device requires no setup and begins measuring immediately. Key technical features at a glance:
- Measurement resolution: Uses a linear potentiometer displacement transducer with a resolution of 0.003 µm (23 bits) over a range of 0 to 20 mm, enabling the detection of even very small changes in the dimensions of plant tissue.
- Long-term stability: The carbon-fiber frame, combined with stainless steel components, reduces measurement drift caused by temperature changes, which is important for applications lasting several years.
- Battery life: The device is powered by two standard alkaline C batteries and operates for up to 9.3 years at a 10-minute sampling interval, so battery replacement in the field is rarely necessary.
The DL-ZN is a Class A terminal device that is compatible with networks from all providers. The polycarbonate housing meets protection class IP66/IP67 and can be used in a temperature range of -20 to 50 degrees Celsius, making it suitable for permanent outdoor installation. When monitoring forests and plantations where locations are remote and manual readings are impractical, the device transmits data on changes in trunk diameter in real time, eliminating the need for on-site visits. The sampling and upload intervals can be configured via a command-line interface or downlink commands. The device is CE-compliant in accordance with the Radio Equipment Directive 2014/53/EU. The DL-ZN1-001 model uses a T-shaped dendrometer frame, while the DL-ZN1-002 model uses an O-shaped frame; the choice depends on the mounting method suitable for the plant being monitored.
| Equipment | |
|---|---|
| sensors | Stammwachstum, Fruchtwachstum |
| antenna | internal |
| Communication | |
| connectivity | LoRaWAN |
| frequency | EU868 |
| activation | OTAA |
| Power supply | |
| power supply | battery, included, replaceable |
| battery details | Alkaline, nicht aufladbar |
| General | |
| variants | dual or Standard |
| Certifications | |
| enclosure protection class | IP66 |
| Others | |
| Brand | Decentlab |
The device is designed for outdoor remote monitoring in fields such as smart agriculture, forestry, and ecophysiology to measure the swelling and shrinkage of plant stems, branches, or roots.
The sensor utilizes a linear potentiometer to provide a measurement range of 0 to 20,000 µm (20 mm) with a sub-micrometer resolution of 0.003 µm.
Yes, the unit features a carbon fiber and stainless steel frame with a UV-resistant polycarbonate enclosure. It is rated IP66/IP67 for weatherproofing and operates in temperatures ranging from -20 to 50 °C.
The device supports long-range communication with a wireless reach of over 10 km in line-of-sight conditions and approximately 2 km in suburban environments.
The sensor is powered by two alkaline C batteries (LR14). It is highly energy-efficient, with an average power consumption of 0.5 mW or less when using a 10-minute measurement interval.
Yes, while the default interval is 10 minutes, both the sampling and data upload intervals are configurable through the command line or downlink command interfaces.
The DL-ZN1-001 is a T-shaped dendrometer, while the DL-ZN1-002 is an O-shaped dendrometer.