The TRIPHAS'O sensor allows remote reading of the electricity consumption of a three-phase installation in a non-intrusive way via the LoRaWAN network. In a single-phase installation, it is used for sub-meter reading. The sensor is specifically designed to meet the energy management needs of industrial and service buildings that use medium and high power equipment with high energy consumption. In a three-phase meter, the TRIPHAS'O sensor provides the active and reactive energy indices, the different available powers, the rms voltages, the rms currents and the phase shift angles of current and voltage for each phase. It transmits the sum of the different energy indices and the different powers of the three phases L1, L2, L3. In a single-phase installation, the TRIPHAS'O sensor provides the energy and power absorbed in each circuit (under count). The energy and power transfer is carried out in 10-minute intervals as standard. The aim is to replicate the load curve. The interval can be reconfigured via the LoRaWAN downlink; it is possible to go down to 30 seconds, for example, to perform a transient analysis during maintenance periods. Implementing the sensor is quick and easy: the sensor is mounted on a DIN rail next to the electrical circuits. The external antenna can be attached to a cable (not supplied) if the sensor is installed in a metal cabinet. A remote, waterproof antenna kit is available as an option. The sensor is supplied from the mains (50Hz - 60Hz) with 230 volts between phase and neutral (or 400 volts between two phases). The sensor is a class II construction. The connections are made via spring-loaded terminal blocks.
| Communication | |
|---|---|
| Frequency | EU868 |
| Connectivity | LoRaWAN |
| Certifications | |
| Certifications | E55014-1, E55014-2, EN 61000-4-2, EN 61000-6-1, EN 61000-6-3, EN 300-220-1 V2-4-1, EN 301 489 V1-6-1, EN 60950-1 CE, RoHS, IP20 |